what size torx screwdriver to remove back from dell xps 9350

| |

If you’re like me, you’ve been wondering what size torx screwdriver to remove the back from your Dell XPS 9350. Well, wonder no longer! I did some research and found the answer.

The correct size is T6. So go ahead and find yourself a T6 torx screwdriver, and you’ll be one step closer to taking your Dell XPS 9350 apart. Good luck!

Why you might need to remove the back from your Dell XPS 9350

The back of your Dell XPS 9350 might need to be removed for a few reasons. Maybe you need to access the inside of your laptop to upgrade or replace a piece of hardware, or maybe you just want to clean it out. Whatever the reason, here’s a quick guide on how to do it.

First, make sure that you have the right tools. You’ll need a small Phillips head screwdriver and a T5 Torx screwdriver. If you don’t have a T5 Torx screwdriver, you can usually find them at any hardware store.

Once you have the right tools, begin by unscrewing all of the screws on the back of your Dell XPS 9350. There should be around 10-15 screws in total. Be careful not to lose any of the screws!

Once all of the screws are removed, gently pry off the back panel of your laptop. Be careful not to damage any of the components inside.

And that’s it! You’ve now successfully removed the back from your Dell XPS 9350.

What tools you will need

In order to remove the back of your Dell XPS 9350, you will need the following tools:
-A small Phillips screwdriver
-A small flathead screwdriver
-A medium Phillips screwdriver
-A #0 Torx screwdriver
-A #1 Torx screwdriver
-A #2 Torx screwdriver
-A spudger (optional)

The step-by-step process of removing the back

In this guide, we’ll show you the step-by-step process of removing the back from your Dell XPS 9350. We’ll also tell you what size Torx screwdriver you’ll need for the job.

First, locate the six screws on the back of your Dell XPS 9350. These screws are located in the center of each side, as well as in the top and bottom corners.

Next, using a Phillips head screwdriver, remove each of these screws. Be careful not to lose them!

Once all six screws are removed, carefully pry off the back panel of your Dell XPS 9350. You may need to use a flat head screwdriver or something similar to get started.

Now that you have removed the back panel, you should see the battery, as well as a number of other components. Locate the two screws holding down the battery (one near each end) and remove them with your Phillips head screwdriver.

You can now remove the battery from your Dell XPS 9350. With the battery removed, you should have clear access to the motherboard and other components.

What to be aware of when removing the back

Before removing the back of your Dell XPS 9350, be aware of the following:
-The back is held on with screws, so you will need a screwdriver to remove it.
-Be careful not to strip the screws when removing them.
-Once the back is removed, be careful not to touch any of the components inside the device. static electricity from your body can damage sensitive electronic components.

How to reassemble your Dell XPS 9350

Before you begin
Turn off your computer and disconnect the power adapter.

Remove the base cover. For more information, see the Dell Knowledge Base article Removing and replacing parts: Dell XPS 13 9343 (2015 Early).

Turn the computer over.

Remove the screws that secure the back cover to the computer.

Peel back the back cover to expose the interior of the computer.

Lift up and remove the battery.

Remove any M.2 cards or other internal devices, if present.

Tips for reassembly

-Use the correct size Torx screwdriver to remove the back of your Dell XPS 9350.
-Be careful not to lose any of the small screws.
-When reassembling your computer, make sure that all the screws are tightened securely.

Troubleshooting

If you’re having trouble removing the back of your Dell XPS 9350, you may need a different size torx screwdriver. Check out this guide to find the right size for your needs.

Conclusion

In summary, you will need a T5 torx screwdriver to remove the back of your Dell XPS 9350. Be careful when removing the back, as there are delicate components inside the laptop that can be damaged if handled improperly. Once you have removed the back, you will have access to the battery, hard drive, and other internal components.

Previous

what size torx screwdriver to open voicelive

what size torx screwdriver is used in tomtom

Next

Leave a Comment