what size screwdriver do i need for phillips pm 2.0×6.0 screws

| |

Are you looking for the answer to this question? Well, look no further! In this blog post, we will provide some helpful tips on how to figure out what size screwdriver you need for different types of screws.


Tools needed for this project:

-Phillips head screwdriver (pm 2.0×6.0)


-2.0×6.0 screws
-Phillips head bit
-#2 Phillips screwdriver


1. Select the right-sized drill bit. A power drill with a 3/32-inch (2.4 mm) carbide bit is ideal. If you don’t have a power drill, use a 3/32-inch steel twist bit and a hand drill.
2. Apply pressure to the screwdriver as you turn it clockwise. Be careful not to apply too much pressure and strip the head of the screws.
3. Turn the screws until they are flush with the surface of the material. Once all screws are in place, use a hand held Phillips screwdriver to finish tightening them down until they are snug against the surface.


-If you’re trying to figure out what size screwdriver you need for a screws, the first thing you’ll need to do is identify the type of screw.
-Once you know the type of screw, the next thing you’ll need to do is measure the screws.
-Then, consult a screwdriver size chart to find out what size screwdriver you need for the screws.


The correct size screwdriver for Phillips PM 2.0×6.0 screws is a #2 Phillips screwdriver.


what size torx screwdriver do i need to open a original xbox

Leave a Comment