Dweller Power is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more
Hybrid table saws have the best features of both traditional cabinet table saws and portable contractor table saws. They are easy to assemble, most come with a drop-down front rail that supports blades from 10” to 15”, and they can be easily transported with a built-in carrying handle.
These tables also offer great value, portability, and ease of use. A good hybrid table saw can be used to cut short job lengths in a production environment as well as for large cuts on long boards in a non-production environment.
A good hybrid table saw can be used to cut short job lengths in a production environment as well as for large cuts on long boards in a non-production environment.
Hybrid table saws also offer great value, portability, and ease of use. A good hybrid table saw can be used to cut short job lengths in a production environment as well as for large cuts on long boards in a non-production environment.
The best part about hybrid table saws is that they can be used for high production as well as for long projects which means that the user can be more flexible with them. They are also easily transportable because of their more compact size.
Note: A Hybrid table saw is mostly used by contractors and professionals, these are not made for beginners. Beginners and hobbyists most often need a less powerful tool since most of their projects are for DIY. A beginner’s table saw would most often be a lower end table saw.
Don’t have time To read? No worries!
Below are our top picks for your convenience
Dweller Power’s Best Pick
Best Hybrid Table Saw
Powermatic PM1000
- Accu Fence System
- Arbor Lock for One-Handed Exchange
- Precision Ground Cast Iron Surface
- Tool-Less Guard Assembly
- Best Hybrid Table Saw
Best Budget Hybrid Table Saw
Shop Fox W1837
- Rip Capacity: 30″ Right | 15″ Left
- 2 HP Power Motor
- Enclosed Cabinet Bottom
- Precision Ground Cast Iron Table
- Best Budget Hybrid Table Saw
Best Hybrid Table Saw for the Money
Delta 36-5100T2
- 15 Amp Contractor Grade Motor
- 30″ Rip Capacity
- 13/16″ x 8″ Stacked Dado Capacity
- Biesmeyer Fence Accurate to 1/64″
- Best Hybrid Table Saw for the Money
Best Hybrid Table Saw for Small Shops
JET JPS-10
- ProShop Fence System
- Quick Release Riving Knife
- Blade Dush Shroud Dust Collection
- Magnetic Paddle Switch
- Best Rated Hybrid Table Saw
Best Rated Hybrid Table Saw
JET 708674PK
- Patented Arbor Lock
- Quick Release Riving Knife
- Poly-V Drive Belt System
- Sealed Storage Drawer
- Best Rated Hybrid Table Saw
Best Hybrid Table Saw for Woodworking
Powermatic 64B 1791230K
- Accu Fence System
- Quick Release Riving Knife
- Cast Iron Trunnion
- Micro-Adjust Miter Gauge
- Best Hybrid Table saw for Woodworking
Best Industrial Hybrid Table Saw
Baileigh TS-1044H
- Single Phase Power Motor
- Heavy Duty 44″ x 27″ Cast Iron Table
- Zero-Clearance Table Insert
- Digital Readout for Rip Fence
- Best Industrial Hybrid Table Saw
The 7 Best
Hybrid Table Saw
#1 Powermatic PM1000 –
Best Hybrid Table Saw
The Powermatic PM1000 puts all the power of a powerhouse table saw in a hybrid package. It’s a durable and powerful portable table saw that can quickly chop through wood, metal, and even plastic. All you have to do is stick it to the ground and start working with it. It plays amazingly with other tools in your stable, giving you the power to perform both small and heavy jobs in just about any condition.
Review:
The Powermatic PM1000 Hybrid Table Saw is a top of the line table saw that has a powerful 1 ¾ HP, 3-phase induction motor. This gives you more power and longer blade life. The lift angle adjusts from zero to 45 degrees in order to make bevel cuts up to 45 degrees.
The Powermatic PM1000 also has an improved fence system with a slot for dado sets and has an extruded aluminum cast table top with miter slots for various other attachments such as hold down clamps and featherboards. This is a unique saw because it has a splash guard and dust collection system.
The Powermatic PM1000 also has built-in wheels for easy mobility. However, this table saw does have some flaws such as the fact that there is no extension table (which may make it difficult to cut large pieces of wood). This table saw also may be inconvenient to use because of its open stand. Otherwise, this Hybrid Table Saw is great, and it is one of the best table saws on the market.
Pros:
- Accu Fence System
- Arbor Lock for One-Handed Exchange
- Precision Ground Cast Iron Surface
- Tool-Less Guard Assembly
- Best Hybrid Table Saw
Cons:
- Packaging may be a problem
- No thin kerf riving knife
#2 Shop Fox W1837 –
Best Budget Hybrid Table Saw
Review:
The Shop Fox W1837 is a hybrid table saw that is a good budget-friendly option. This hybrid table saw is made of plastic and it has an 8.5” cast iron table top, this ensures that the blade stays in place for longer. The Shop Fox W1837 also has a powerful 2 HP motor which gives you enough power to cut any type of material.
The Shop Fox W1837 budget table saw’s stand is open, this can make it slightly inconvenient to work with because there isn’t room for the operator in order to move around comfortably; however, this should not be too much of an issue because most people are going to use this saw only for short periods of time instead of constantly using it throughout their workday.
Other features include a movable fence, a good dust collector, and wheels that can be used for mobility. The Shop Fox W1837 is also one of the best hybrid table saws because it has great power, value, and is easy to transport. Overall this is one of the best budget hybrid table saws available since it’s also the best hybrid table saw under $1000.
Pros:
- Rip Capacity: 30″ Right | 15″ Left
- 2 HP Power Motor
- Enclosed Cabinet Bottom
- Precision Ground Cast Iron Table
- Best Budget Hybrid Table Saw
Cons:
- Stocks are low because of high demand
- Ships in 2 packages
- Sliding Guide does not hold square
#3 Delta 36-5100T2 –
Best Hybrid Table Saw for the Money
Review:
The Delta 36-7000T2 is a great alternative to purchasing the top of the line table saws. The Delta has dual wings and it has 1 ¾ HP motor with up to 30” rip cuts, which means that you will get more power from your blade and be able to cut bigger pieces of wood which makes this a great tool.
The Delta 36-5100T2 is a hybrid table saw that has features that make it worth the buy. This table saw has an induction motor which means that you will get more power out of your blade and have less chance of overheating. The saw’s stand is open, but this shouldn’t be too much of an issue because most people just use the table saw for short periods of time.
One can also unmount the table saw from it’s initial base and mount it to a folding table saw stand for more portability. When it comes to this, the Delta 36-7000T2 is found to be compatible with the best table saw stands in the market.
This hybrid table saw also features a fence system, as well as wheels for mobility and it has cast aluminum top with miter slots. This model also has a slot to add dado sets which means you can cut 2-1/4″ deep dados up to 3-1/8″ wide while using your miter gauge or blade. The Delta also has cross cut and rip fence adjustments. This model also has a lift table, which makes it easier to work with for the inexperienced.
This hybrid table saw is very lightweight and it is very easy to move around. Overall this is one of the best hybrid table saws for money because it comes at an affordable price as well as being easy to use and great quality for such a low price. This is the best hybrid table saw for the money, and it is a great bargain.
Pros:
- 15 Amp Contractor Grade Motor
- 30″ Rip Capacity
- 13/16″ x 8″ Stacked Dado Capacity
- Biesmeyer Fence Accurate to 1/64″
- Best Hybrid Table Saw for the Money
Cons:
- Frame may bend
- Table not as smooth
#4 JET JPS-10 –
Best Hybrid Table Saw for Small Shops
Review:
The JET JPS-10 is a hybrid table saw that has an induction motor. This means that you will get more power out of your blade and have less chance of overheating. The saw’s stand is open, but this shouldn’t be too much of an issue because most people just use the table saw for short periods of time.
This hybrid table saw also features a fence system, as well as wheels for mobility and it has cast aluminum top with miter slots. This model also has a slot to add dado sets which means you can cut 30” of rip cuts and up to 52” if you order their exclusive ProSHop Fence System while using your miter gauge or blade. This model also has a lift table, which makes it easier to work with for the inexperienced.
Overall this is one of the best hybrid table saw for small shops because of the amazing experience that comes at an affordable price at a compact size, also making it one of the best portable table saws, as well as being easy to use and great quality for such a feature-intensive hybrid table saw.
Pros:
- New Patented Arbor Lock
- Quick Release Riving Knife
- Blade Dush Shroud Dust Collection
- Magnetic Paddle Switch
- Best Rated Hybrid Table Saw
Cons:
- Ships in 2 packages
- Reviews are low
#5 JET 708674PK –
Best Rated Hybrid Table Saw
Review:
The JET 708674PK is a hybrid table saw that has a 3HP induction motor. This means that you will get more power out of your blade and have less chance of overheating. The saw’s stand is cased in with some heat build-up, but this shouldn’t be too much of an issue because most people just use the table saw for short periods of time.
This hybrid table saw also features a fence system, as well as wheels for mobility and it has cast aluminum top with miter slots. This model also has a slot to add dado sets which means you can cut 3 ½” deep dados up to 5″ wide while using your miter gauge or blade. The JPS-10 has cross cut and rip fence adjustments. This model also has a lift table, which makes it easier to work with for the inexperienced.
More often, contractors would substitute their jobsite portable table saws in favor the this Hybrid Table Saw, because it’s compact enough to be transported and kept set in the workplace. This makes it a great second option for the best contractor table saw.
With all its features and amazing cutting speed, cutting depth, and overall cutting capacity added to its more compact design, we believe this is the best hybrid table saw for small shops.
Pros:
- Patented Arbor Lock
- Quick Release Riving Knife
- Poly-V Drive Belt System
- Sealed Storage Drawer
- Best Rated Hybrid Table Saw
Cons:
- Ships in 2 packages
- Assembly is complicated
#6 Powermatic 64B 1791230K –
Best Hybrid Table Saw for Woodworking
Review:
The Powermatic 1791230K is a hybrid table saw that offers a great amount of versatility as well as power. It has the capability to easily cut through any type of material which makes it the best hybrid table saw for woodworking.
This hybrid saw has a top of the line, double-bearing miter gauge which allows for quick and precise blade changes. The saw also has a cast aluminum base with miter slots to hold the blade securely in place while you are working. It is also equipped with all four rip fence kits which allow you to easily rip cuts of up to 50” wide. The riving knives offer plenty of steel protection in order to help protect against damage from the blade.
A lot of contractors will choose this table saw because it can easily cut through any type of wood without it making much sound when giving precise cuts. The table saw is relatively lightweight as well which makes transport very easy. The saw blade is also very precise making a very accurate cut.
Overall, the Powermatic 1791230K is a great choice for people who are looking for a table saw that offers durability, precision, and maneuverability for woodworking in one.
Designed for the most sophisticated cutting. It has one of the best rip capacities for a hybrid table saw and for the best dado capacity as well. Making it one of the best table saws for dado cuts.
The table saw comes with several safety features that make operation very easy as well as making the product very comfortable to use. This is an excellent option for both professional and home use.
Pros:
- Accu Fence System
- Quick Release Riving Knife
- Cast Iron Trunnion
- Micro-Adjust Miter Gauge
- Best Hybrid Table saw for Woodworking
Cons:
- Leg Extension are not even
- Dust Blow may happen
#7 Baileigh TS-1044H –
Best Industrial Hybrid Table Saw
Review:
The Baileigh TS-1044H is a hybrid table saw that has a powerful 1.75 hp motor. The TS-1044H also has a great amount of power which makes it very easy to cut through any type of wood. With all its features and amazing cutting speed, cutting power, and overall cutting capacity added to its more compact design, we believe this is the best premium hybrid table saw for professionals and home use.
The Baileigh table saw comes with many safety features like it’s anti-kickback pawls, high visibility sight window so you can view your wood easily and accurately measure your cut as well as the blade guard for extra protection while working on your project. This Saw also comes with an in-line blade guard which can be easily adjusted.
The TS-1044H also has a 180 degree dust port that automatically shuts off when you turn the blade guard off, this saves time and energy when cleaning up after you’re done working. The saw is lightweight as well which makes transport very easy. This table saw also comes with built in casters to make moving it around very easy. This is an excellent option for industrial use.
Pros:
- Single Phase Power Motor
- Heavy Duty 44″ x 27″ Cast Iron Table
- Zero-Clearance Table Insert
- Digital Readout for Rip Fence
- Best Industrial Hybrid Table Saw
Cons:
- Ratings are minimal
- Expensive
Hybrid Table Saw Comparison:
Hybrid Table Saw vs Cabinet Table Saw
The hybrid table saw is lighter in weight and easier to transport from place to place. According to our study, the hybrid table saws have a base cover that makes it safer and easier for you to work on your project.
A cabinet table saw is heavier, more powerful, but may be harder for some people to use because of its design. The best cabinet table saws will have the space that you need for larger projects because they can fold out. A cabinet saw is also safer than a blade so they are great if you’re working with children or pets nearby as there is less risk of injury since it would take an immense amount of force before any damage occurred in this type of saw.
Hybrid Table Saw vs Contractor Table Saw
The hybrid table saw is lighter in weight and easier to transport from place to place. According to our study, the hybrid table saws have a base cover that makes it safer and easier for you to work on your project.
A cabinet table saw is heavier, more powerful, but may be harder for some people to use because of its design. The cabinet table saw will have the space that you need for larger projects because they can fold out. A cabinet saw is also safer than a blade so they are great if you’re working with children or pets nearby as there is less risk of injury since it would take an immense amount of force before any damage occurred in this type of saw.
Dweller Power Hybrid Table Saw
Buying Guide
Blade Guard
A blade guard is specially designed to cover the blade for your safety. There are also many different types of blade guards that you can buy depending on what type of materials you plan to cut with your saw.
For example, a traditional type of blade guard would be the T-collar which is designed for general use when cutting boards or plywood. This type of guard attaches around the outside edge of the top and extends halfway down each side.
Riving Knife
A riving knife in a table saw blade guard is a piece of metal that rides against the wood you are cutting, keeping two or more pieces from pinching the blade and so potentially damaging it. It is also a helpful tool to reduce kickback.
Anti Kickback Pawl
Anti-kickback pawls are designed to keep the saw blade from kicking back when the user is cutting through wood. The anti-kickback pawl system consists of two small metal pins that are held by a metal frame. The pins are pressed up against the wood being cut and they usually fold outwards to keep the blade in contact with it.
The anti-kickback pawl will typically be used when ripping, crosscutting, or dadoing so that one edge of board doesn’t fly back and hit you in the face or arm which could cause injury.
Cast Iron Table
A cast iron table is an excellent choice for a hybrid table saw. A cast iron table will be more durable and should provide you with a longer lifespan than some other types of tables. It also has a flat, smooth surface that is perfect for cutting materials like wood or metal. A cast iron table makes the surface of your work bench feel much more comfortable to work on too.
Miter Gauge
The miter gauge is a device that attaches to the saw’s arbor. It helps the user guide the wood through the saw by using an adjustable gauge as its mounting point. The direction of a cut should lie square to one edge of this gauge. Ideally, you should use your table saw and perpendicular to it as well as two guiding boards for additional support.
One should choose the best miter gauge for their table saw to get the most accurate cuts possible when the stock miter gauge comes subpar.
Arbor Lock
An arbor lock is designed to hold the saw blade in place when you are changing the blade out. This lock usually has a lever on one side that can be used to depress the other side inward. This will prevent any slippage or movement of your blade during the process of changing it out.
Dust Collection Port
The dust collection port is a hole in the blade guard that is designed to capture any wood dust from the sawing process. The port will usually have a rubber gasket that covers the blades as well as being threaded so that you can attach extra accessories like additional extensions, auxiliary fences, and zero-clearance inserts.
With a hybrid table saws dust collection, some models may have a subpar build. Learning how to make your own DIY table saw dust collection will prove helpful when needed.
Fence System
A fence system in your table saw is a guide that is used to help you cut your material at the desired distance. There are also two types of fences that are commonly used with table saws, they either attach to the front or back of the table saw.
Rip Fence
A rip fence is a type of fence system that attaches to the front edge of the table saw. This type of fence is used when making rip cuts, which are cuts made along the length or “rip” grain. A rip fence can help you make straight and accurate cuts as well as help you get consistent results every time. It can also make it easier for you to measure your cut because they usually come with an oversized face that displays measurements with scales.
Saw Blade
The blade is the cutting tool for the saw. The blade makes contact with the wood throughout the entire cut. This type of blade will be placed on a spinning arbor which helps to create an even, precise cut. One should search for the best table saw blades to match the power of their hybrid table saws.
Blade Speed
Blade speed is the speed at which your blade is spinning. Blade speed can be measured in feet per second or miles per hour. Blade speeds that are higher are used for thicker materials like plywood and thicker lumber.
Lower blade speeds are more commonly utilized for cutting man-made board material like drywall or laminates which don’t require as much power as thick lumber does.
Blade Height
Blade height is determined by two different factors. The first factor is the height of the blade from the ground when it’s at its lowest point. The second factor is the distance between the blade and the surface of your workbench.
Blade Tilt
Blade tilt is the angle that the saw blade is at when it’s positioned in front of a work surface. Blade tilt is determined by how much the blade itself protrudes from the table and which way it’s angled. Some standard blade tilts are 10 degrees, 15 degrees, 30 degrees, 45 degrees and 60 degrees. The higher degree angles are used for thicker materials while lower angles will be used for finer cutting of thinner wood materials like balsa wood or plywood.
Dado Blade
A dado blade is a straight-edged saw blade with a rectangular-shaped cross section. This type of blade is designed for cutting grooves, rabbets, dadoes or other types of dados. A dado blade can be mounted in either the table saw or the radial arm saw.
Extension Table
An extension table is a table that attaches to the main saw. These tables are used when you need more room for working with your project because it also gives you more of a working surface. This type of table can also be used instead of a miter gauge and its accompanying guide boards when making certain types of cuts.
Magnetic Switch
A magnetic switch is a safety feature that is hidden in the saw. This type of switch will detect when the blade comes into contact with an object like your arm. The wire in the magnetic switch will close a circuit when it passes by this object, which will activate an alarm and turn off your saw to stop any further injury from occurring.
Frequently Asked Questions (FAQs)
Can a hybrid table saw be a portable table saw?
No, hybrid table saws are stationary by design since they are relatively heavy. But they can definitely be considered as portable table saws because with 2 or more helpers to move the hybrid table saw from and to somewhere.
Is a hybrid table saw a power tool?
Yes, a hybrid table saw is a power tool.
Should I choose a cabinet saw over hybrid saw?
That wholly depends on your needs, workload, and experience level. If you’re a hobbyist with a lot of DIY projects, a hybrid table saw will be your best bet. If you’re a professional woodworker, then a cabinet saws power is your answer.
Should I choose a contractor saw over hybrid saw?
That wholly depends on your needs, workload, and experience level. If you’re a contractor with moderate workload and needs a portable saw, then a contractor saw will be best for your projects. If you’re a contractor that works from the workshop, then a hybrid saw has more power for a workshop.
Is a drive belt motor good for hybrid table saws?
A drive belt is a type of accessory that attaches to your saw. A motor will then use this belt to spin the blade which ultimately will start your saw.
Is a serpentine belt good as a drive belt for a table saw motor?
Yes, a serpentine belt is commonly used as a drive belt for table saws.
Is the Shop Fox w1819 Hybrid Table Saw discontinued?
The Shop Fox w1819 Hybrid Table Saw is not eliminated in Amazon. But it has been discontinued.
Is the Laguna Tools Fusion 110V Hybrid Table Saw discontinued?
The Laguna Tools Fusion 110V Hybrid Table Saw is not eliminated in Amazon. But it has been discontinued.
Is the DeWALT DWE7491rs a hybrid table saw?
No, although you will see lots of reviews if you search Google that the DeWALT DWE7491rs is considered a hybrid table saw, it’s not. The DeWALT DWE7491rs is a portable contractor table saw that’s best for beginners and woodworking hobbyists.
Is a trunnion mount good for a hybrid table saw?
No, a trunnion mount is not good for a table saw because a cabinet mount already isolates the blade and motor assembly with all of it’s moving parts solidly in a cabinet ,which means you can easily and readily adjust the table to align with the blade.
Can I mount a circular saw on a hybrid table saw?
No, circular saw will not fit on your table saw because a circular saw only has a straight blade without any teeth or burrs, therefore it will not make a smooth cut and could result in kickback.
Best Hybrid Table Saw
Final Thoughts
This ends our Review Series for the Best Hybrid Table Saw.
With all that said, remember that to maximize efficiency in your work-shed and workshop projects, you need the Best Hybrid Table Saw. The Best Hybrid Table Saw will be the key to your next project that requires intensive woodworking. So you better choose wisely!
We want you to be sure of what you plan to get, please don’t hesitate to ask for advice.
Love our Best Hybrid Table Saw Review? Leave a comment or drop us an email at dwellerpower@gmail.com, and we will get back to you as fast as possible!
Love our Guides & Reviews?
Share it with your friends!
Charles is a veteran woodworker and wants to help people online to learn more about woodworking. He hopes to encourage more people to build their own furniture and get comfortable with using power tools.
In this blog post, Charles shares a few tips for getting started on your DIY woodworking journey, plus all the resources and websites he recommends for learning the craft. You’ll be surprised how easy it is to start from scratch!
