Dweller Power is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

A table saw is one of the most versatile power tools a home or professional woodworker could own.
The table saw blade is perfect for making straight cuts and ripping through sheet material with ease.
But before you plug in your new table saw, there are some basic accessories that will make it safe to use and achieve the desired results every time.
Who is this guide for?
This is made for DIYers and Professionals who either own a portable table saw or a contractor table saw.
Here are the 25 must have table saw accessories for any woodworker who wants to get professional results with minimal effort:
1) Miter Gauge – A miter gauge is the perfect accessory to have when crosscutting. It will ensure that your table saw fence remains square with the blade, keeping all of your cuts accurate.
2) Push Stick – A push stick will allow you to safely guide small pieces of wood past the blade of the table saw. It can also be used when feeding materials through a router table or band saw.
3) Table Saw Fence – A good fence system is one of the most important accessories available for any table saw owner. It should be made of high-quality materials and the rails should be long enough to accommodate your longest work pieces.
4) Blade Guard – A blade guard will keep loose clothing, hands, or fingers away from the spinning blade of a table saw. It will also help you avoid kickback or pinching should something get caught in the teeth of the blade.
5) Dust Collection System – A dust collection system is one of the most important accessories for any professional woodworker. It will ensure that a continuous flow of dust from your tool is not being carried off into the air.
6) Outfeed Table – An outfeed table will help support larger work pieces during the cutting process. It will also allow you to make more precise cuts–especially when using a miter gauge.
7) Push Block – A push block is an important accessory when working with joinery or other woodworking projects that require you to set the piece after each cut. It will allow you to do just that in a very safe manner. A common found type of push block is the featherboard, learning how to use a featherboard with a table saw will improve your woodworking by leaps and bounds!
8) Bench Vise – A bench vise will help you clamp your work pieces down before performing any cutting operations. It will also allow you to hold your work piece in place and secure it with clamps or c-clamps while you perform other tasks.
9) Riving Knife – A riving knife is an essential accessory for rip cuts. It will ensure that your cut is square and allow you to measure the depth of the cut. It also prevents kickback.
10) Router Table – A router table will work in conjunction with a table saw to make cross-cutting through sheet material a breeze. It can also be used to make mortises, rabbets, tenons, or dadoes.
11) Zero Clearance Insert – A zero clearance insert will help reduce the amount of space between the blade and the side of the table saw. It will ensure that all of your cuts are as accurate as possible.
12) Tool Stand – A tool stand will help protect your table saw from dirt, dust, and debris. It will also keep the components of your table saw–such as the blade guard, riving knife, rip fence, and miter gauge–clean and in good working order.
13) Table Saw Stand – A table saw stand will keep your saw off the ground and out of harm’s way. It will also help protect the motor from damage and vibration.
14) Blade Guard Clamp – A blade guard clamp is another important accessory that should be included in any table saw owner’s tool kit. It will ensure that your blade guard remains securely fastened to the table saw during use.
15) Pivot Support – A pivot support will help keep your work piece square while making crosses cuts or rabbet cuts.
17) Sawstop – A sawstop is a safety device that will sense your hand in the cutting zone and stop the saw blade from spinning.
18) Throat Plate – A throat plate will ensure that the work piece is firmly secured to the table saw’s table and fence rails.
19) T-Square – A t-square will help you determine the angle of your miter cuts on both the cross-cut and rip fence rails.
20) Measuring Tape – A measuring tape will help you measure and mark your work piece for accurate cuts.
21) Miter Saw Station – A miter saw station will help make your job of cross cutting much easier if you plan to mount your miter saw on top of your table saw table.
22) Workbench – A workbench will help you work at a comfortable height for extended periods of time. It will also help you store your tools and supplies in an orderly fashion and keep other project material within reach.
23) Guide Rail – A guide rail will help you make a perfect variety of cuts on the fence of your saw.
24) Dado Blade – A dado blade will help you cut box-shaped grooves on your work piece. A dado blade is also the best option to use when learning how to square lumber with a table saw.
25) Auxiliary Fence – An auxiliary fence can be used to help you make exact cross cuts or miter cuts. It can also be used to make dadoes and rabbets.
These are the 25 must-have table saw accessories every woodworker should own.

These accessories will help you achieve professional results with minimal effort and time invested.
Don’t forget to add these tools to your table saw, and remember: safety first.
Why spend all that money on a table saw if you don’t buy the accessories that will make it worth your while?
Proper safety precautions should always be taken when using any power tool.
This is especially true for table saws–a serious injury can result from carelessness and bad habits. Always review the manufacturer’s instructions before using your new saw in order to avoid any injuries or accidents.
Table Saw Accessories DIY
Final Thoughts
This ends our How To Guide of Table Saw Accessories DIY.
We hope the knowledge you gained here will help you in the future with your DIY or Professional Woodworking projects. We want you to be sure of that what you get from us are 100% facts, so please don’t hesitate to ask for advice or to advise us in return with accurate facts.
Love our Table Saw Accessories DIY How-To Guide? Leave a comment or drop us an email at dwellerpower@gmail.com, and we will get back to you as fast as possible
Love our Guides & Reviews?
Share it with your friends!
Dweller Power is the #1 Trusted Authority Source for everything Home Improvement, DIY, Power Tools, and Hand Tools. Everything here is published by the Dweller Power Editorial Team to aid home owners and other DIY Enthusiasts with their projects.