how to open a ds without a tri wing screwdriver

| |

Are you trying to open a DS without a tri wing screwdriver? Well, you’ve come to the right place! In this blog post, we’ll show you how to open a DS without a tri wing screwdriver. We’ll also provide some tips on how to prevent your DS from opening in the future.

Introduction

In this guide, we will show you how to open a Nintendo DS lite without a Tri-Wing screwdriver. The first thing you will need is a pen. We will use the pen to pop off the red and white plastic caps on the top of the DS lite. Once you have done that, take the tip of the pen and insert it into the hole in the red plastic. You should feel some resistance, but keep pushing until you hear a click. That click means that you have released the spring loaded hinge that holds the red plastic cover in place. Now do the same thing to release the white plastic cover.

What you’ll need

In order to open a DS without a tri wing screwdriver, you will need the following:
-A small flat head screwdriver
-A nail file
-A butter knife

Instructions:
1. Use the small flat head screwdriver to remove the back plate of the DS.
2. Use the nail file to file down any sharp edges on the battery.
3. Use the butter knife to pry open the battery compartment.
4. Replace the battery and reassemble the DS.

Step-by-step guide

If you’re trying to open a Nintendo DS without a tri wing screwdriver, there are a few ways you can do it. The easiest way is to use a flat head screwdriver or a nail file. Just insert the tool into the tiny hole in the battery cover and twist.

Another way is to use a pair of tweezers. Gently insert the tips of the tweezers into the hole and twist. This method takes a bit more patience, but it’s worth a try if you don’t have a tri wing screwdriver handy.

If all else fails, you can always take your DS to a professional who can open it for you.

Opening the DS without a Tri-Wing screwdriver

If you need to open your DS but don’t have a Tri-Wing screwdriver, there are a few ways you can do it. One way is to use a small flathead screwdriver to carefully pry open the case. Another way is to use a pair of pliers to twist off the screws. Be careful not to damage the screws or the case when you’re doing this.

Alternative methods

If you don’t have a tri wing screwdriver, there are a few alternative methods you can use to open your DS.

One method is to use a small flathead screwdriver. Carefully insert the screwdriver into the hole in the center of the tri wing screw, and then turn it counterclockwise to loosen the screw. Once the screw is loose, you should be able to remove it with your fingers.

Another method is to use a sharp object, such as a paperclip or a needle. Gently insert the sharp object into one of the holes in the tri wing screw, and then twist it counterclockwise to loosen the screw. Once the screw is loose, you should be able to remove it with your fingers.

Once you have removed the tri wing screws, you should be able to open up your DS and access the internal components.

Tips and tricks

Are you having trouble opening your DS without a tri wing screwdriver? Here are some tips and tricks that might help you out.

First of all, try using a small flathead screwdriver. If the screws are tight, you might need to use a little bit of force to get them to budge. Once you’ve loosened the screws, you should be able to remove them with your fingers.

If you don’t have a flathead screwdriver, you can try using a paperclip or a safety pin. Just be careful not to damage the screws or the console.

If all else fails, you can always take your console to a professional who can help you open it up.

Conclusion

We hope this guide was helpful in explaining how to open a Nintendo DS without a tri wing screwdriver. If you have any further questions, please feel free to reach out to us.

Further reading

If you don’t have a tri wing screwdriver, don’t worry! Here are a few other ways to open up your DS without one:

-Use a sharp knife or pair of scissors to carefully pry open the back panel of the DS. Be very careful not to damage the electronics inside!
-Use a small flathead screwdriver to unscrew the screws on the back of the DS. Again, be careful not to damage anything inside.
-Take the DS to a professional electronics repair shop and have them open it for you.

Previous

how to open a ps4 without a torx screwdriver

how to make tri wing screwdriver

Next

Leave a Comment