how to open a door with a flathead screwdriver Have you ever been in a situation where you need to open a door, but all you have is a flathead screwdriver? Well, have no fear! With this easy-to-follow guide, you’ll be opening doors with flathead screwdrivers in no time.Introduction

| |

flathead screwdriver is one of the most common and versatile tools in any home toolkit. It can be used for a variety of tasks, from opening a door to adjusting a doorknob. While it may seem simple, using a flathead screwdriver correctly can make all the difference in the world. This guide will show you how to use a flathead screwdriver for both small and large tasks.

What You’ll Need

-A flathead screwdriver
-A hammer
-An old rag

Instructions
1. Look at the door to determine which way it opens. If the door has a knob, it will most likely open inward. If the door has a lever, it will most likely open outward.
2. Place the flathead screwdriver into the center of the door where the doorknob would be (or near the top if the door has a lever).
3. Firmly grip the handle of the screwdriver and use it to pry the door open. You may need to use some force. If you’re having trouble, try using a hammer to lightly tap the end of the screwdriver.
4. Once you’ve pried the door open far enough, wedge an old rag into the opening to keep it from closing again.

Step One: Insert the Screwdriver

Step One: Insert the Screwdriver

To open a door with a flathead screwdriver, start by inserting the blade of the screwdriver into the space between the door and the frame. Then, push on the handle of the screwdriver to apply pressure to the door. If the door is locked, you may need to jiggle the screwdriver a bit to get it past the latch.

Step Two: Turn the Screwdriver

With the screwdriver in the lock, turn it slowly to the left. You may feel the mechanism catch at first, but keep turning until the latch pops open.

Step Three: Apply Pressure

Slowly turn the screwdriver clockwise while applying pressure to the handle. You will feel the door begin to open as the latch moves out of the strike plate. Continue turning and applying pressure until the door is open far enough for you to comfortably step through.

Step Four: Remove the Screwdriver

Using the flathead screwdriver, pry the door open. If the door is stuck, you may need to use a hammer to tap the screwdriver and help loosen the door. Once the door is open, remove the screwdriver and put it away.

Conclusion

There are many ways to open a door with a flathead screwdriver. The most common method is to use the screwdriver as a lever, by placing the tip of the screwdriver under the doorknob and applying pressure. Other methods include using the screwdriver as a pry bar or wedge, or by striking the screwdriver with a hammer to force it through the door.

Additional Tips

If the door is locked, you may need to use a screwdriver to turn the doorknob. To do this, insert the flathead screwdriver into the hole in the doorknob and turn clockwise. You may need to apply pressure to the screwdriver to get it to turn. If the door is still not opening, you may need to use a hammer to tap on the screwdriver until it turns.

Previous

how to make tri wing screwdriver

how to loosen rack on suv security screw star screwdriver

Next

Leave a Comment