how to make a platform for ladders to be 2 ft higher

| |

Looking to make your ladder more stable and easier to use? Check out our guide on how to make a platform for ladders to be 2 ft higher!

Introduction

Ladders are an essential tool for many tasks around the home, but they can often be too short to reach those hard-to-reach places. If you find yourself in this predicament, there is a simple solution – make your own platform to raise the ladder 2 ft higher.

Here’s how:

1. Start by measuring the area where you want to place your platform. You will need four boards that are 2 ft wide and 8 ft long. Cut these out of plywood or another sturdy material.

2. Place two of the boards side by side and screw them together at the edges. Repeat with the other two boards.

3. Place your newly made platform on top of the ladder, making sure that it is level and secure before climbing up.

Now you can easily reach those pesky areas that were previously out of reach!

What You’ll Need

-Tape measure
-Plywood
-Lumber
-Drill
-Circular saw
-Hammer
-Nails

If you’re looking to make a platform for your ladder that’s 2 ft higher, here’s what you’ll need:

First, you’ll need to measure the area where you want to build the platform. You’ll need at least 2 ft by 2 ft of space. Once you have your measurements, mark out the area with tape or chalk.

Next, you’ll need to gather your materials. You’ll need plywood, lumber, a drill, a circular saw, and nails. Make sure to get enough lumber to frame the edges of the platform and support the weight of whatever will be going on top of it.

Now it’s time to start building! Cut your lumber into pieces that will fit around the perimeter of the platform. Nail them into place with your drill and screwdriver. Be sure to predrill holes first so that the wood doesn’t split! Then, cut your plywood to size and nail it onto the top of the frame.

Step One

If you’re looking to make your ladder platform a little higher, there are a few things you can do. First, make sure that the legs of your ladder are at least two feet apart. This will give you more stability and prevent the ladder from tipping over. Next, use some blocks or other objects to elevate the platform. You can also use a piece of plywood or another flat surface to create a makeshift platform. Just be sure that whatever you use is sturdy and won’t collapse under your weight. Finally, be sure to test out your new setup before using it so that you know it’s safe.

Step Two

If you’re looking for a way to make your ladder platform 2 ft higher, there are a few things you’ll need to do. First, find some sturdy boards that are at least 2 feet wide and 6 feet long. You’ll also need some heavy-duty screws and bolts to attach the boards together. Once you have all of your materials, follow these steps:

1. Place two of the boards on the ground next to each other with their ends touching.

2. Screw or bolt the boards together at their ends.

3. Repeat step 1 with the remaining two boards.

4. Now place the two sets of connected boards on top of each other so that they form a rectangle shape when viewed from above. Again, screw or bolt the boards together at their ends. This will create four sides for your platform. If you want your platform to be extra sturdy, you can also screw or bolt the boards together in the middle as well.

5 . Finally, stand your ladder on top of the platform and voila! Your ladder is now 2 ft higher than it was before!

Step Three

If you’re looking to make your platform a full two feet higher, there are a few things you’ll need to do. First, find some cinder blocks or bricks that are about two feet tall. Next, get some plywood and cut it into four equal pieces. Now you should have everything you need to get started.

To begin, set the cinder blocks or bricks up in a square formation on the ground. Once they’re all in place, take the plywood and lay it over top of the cinder blocks or bricks. Make sure that the plywood is level and even with all sides of the square. Once that’s done, you can start nailing or screwing the plywood into place.

Now all you have to do is put your ladder on top of the platform and start climbing! With this simple DIY project, you can easily add an extra two feet to your ladder’s height, making it much easier to reach those high places.

Step Four

If you’re looking for a way to make your ladder 2 feet taller, there’s no need to go out and buy a new one. With a few simple supplies, you can easily create a platform that will give you the extra height you need. Here’s how:

First, gather some plywood, two-by-fours, and screws. Cut the plywood into four pieces that are each 2 feet square. Then, cut the two-by-fours into eight pieces that are each 2 feet long.

Next, take four of the plywood squares and attach them together using the screws to form a rectangular platform. Then, do the same with the remaining four plywood squares and two-by-fours to create another rectangular platform.

Now it’s time to put your platforms to use! Place one on top of the other so that they form a makeshift staircase. Then set your ladder on top of the platforms and voila! You now have an extra 2 feet of height to work with.

Step Five

Making a platform for your ladder to be two feet higher is a simple process that only requires a few materials. With this extra height, you’ll be able to reach those pesky high places with ease! Here’s what you’ll need:

-Two pieces of plywood (4′ x 8′)
-Eight 2x4s (8 ft long)
-Construction adhesive
-Screws
-Paint or sealant (optional)

First, cut the plywood into four equal pieces (2′ x 4′). Next, take your 2x4s and cut them in half so that you have 16 pieces that are 4 ft long. Now it’s time to assemble the frame of your platform. Take four of the 4 ft 2x4s and attach them together using construction adhesive and screws to form a rectangle. Repeat this step with the remaining four 2x4s so that you have two rectangles. These will be the sides of your platform.
Now, take two of the plywood pieces and attach them to the top of each rectangle using construction adhesive and screws. Be sure to line up the edges so that your platform is level. Once both pieces of plywood are attached, flip the frame over so that it is right side up. You should now have a basic rectangular platform with no bottom.
To finish off your platform, take the remaining two pieces of plywood and attach them to the underside of the frame using construction adhesive and screws. This will create a solid base for your ladder to rest on when it is in use. If desired, you can now paint or seal your platform to protect it from weather damage or wear and tear over time

Conclusion

In order to make a platform for ladders to be 2 ft higher, you will need to follow these simple steps:

1. Firstly, you will need to find a level spot on which to build your platform. This should be firm and level ground, so that your ladder can have a stable base on which to rest.

2. Once you have found a suitable spot, measure out the area that you will need for your platform. It is important to make sure that your platform is large enough to accommodate the ladder, as well as any tools or equipment that you may need while using the ladder.

3. Once you have measured the area, mark out the perimeter of the platform with some stakes or other markers. This will help you to keep track of where your platform needs to go when it comes time to build it.

4. After marking out the perimeter of the platform, begin excavating the area within those boundaries. You will need to dig down about 2 feet in order for theplatformto be high enough off of the ground for ladders. Be sure to remove any rocks or other debris from the excavation site before continuing.

5 .Once you have excavated the area, begin leveling it off so that it is nice and flat. This step is important in order ensure that your ladder has a stable surface on whichto rest when in use. Use a shovel or another toolto flatten out any bumps or uneven spots in the excavation site . If necessary , add more dirt or soil untilthe entire surface is level . Try walking around barefootin order test howlevelthe ground feels beneath your feet . If it feels uneven anywhere , continue workingonthat spot untilitis smooth .
6 Finally , onceyouare satisfied withhowlevelthe ground is ,youcan begin buildingyourplatform . For this ,youwillneed some lumber boards cuttothe correct sizeand some nailsor screwswith whichto fastenthem together . Beginbyassemblingthe frameofyourplatform by nailingor screwingthe lumberboards togetherintoa rectangle shape . Make surethatthisframeis sturdy and won’twobblewhen someone steps ontoit . Then , fill inthe frame with additionallumber boardsuntil itismade solidand flushwith all sidesoftherectangle shape . Nailor screwtheseboardsinto placeto finish upbuildingyourplatform !

Previous

how to switch attic folding ladder to telescopic ladder

how to measure ladder height

Next

Leave a Comment